Facile preparation of MgAl2O4/CeO2/Mn3O4 heterojunction photocatalyst and enhanced photocatalytic activity

Novel Mn₃O₄-promoted double p?n junction MgAl₂O₄/CeO₂/Mn₃O₄ heterojunction photocatalyst was constructed by one-step synthesis method and two-step synthesis method. The X-ray powder diffraction, Fourier transform infrared spectrum, X-ray photoelectron spectroscopy, optical and photoluminescence demonstrated that the MgAl₂O₄/CeO₂/Mn₃O₄ heterojunction photocatalyst was synthesized by the two-step synthesis method comprehends a high crystallinity, charge carrier migration and separation efficiency, and relatively low optical absorption coefficient. The MgAl₂O₄/CeO₂/Mn₃O₄ heterojunction photocatalysts were efficiently used as simulated sunlight-driven n-n and p-n double junction photocatalyst for the simultaneous degradation of methylene blue (MB) dye. The continuous double p?n junction MgAl₂O₄/CeO₂/Mn₃O₄ heterojunctions strengthened the function of single n-n or p-n junction and guided the charge carrier migration and separation direction; thus, the oxidation and reduction reactions occur at the active site of spatial separation and prevent the recombination of electrons and holes. The results suggest that the continuous double p?n junction MgAl₂O₄/CeO₂/Mn₃O₄ heterojunctions are very promising candidate material for enhancing the photocatalytic activity in the photocatalytic degradation of MB dye.     

“蓝瓶子”实验再探究*

利用SPSS 25.0统计软件对“蓝瓶子”实验进行正交实验设计,通过统计学分析得出最佳实验条件。利用氧化还原传感器(ORP)对“蓝瓶子”振荡体系的电极电势变化曲线进行分析,并针对蓝色的产生和消失过程设计3组对比实验深入探究,阐明其反应原理,意在引导学生深刻理解趣味实验现象背后的微观反应本质。     

Trash GGBFS-based geopolymer as a novel sunlight-responsive photocatalyst for dye discolouration

In this study, we report a waste material-ground granulated blast furnace slag (GGBFS) as a low cost geopolymer, hybridised with ZnO to form a novel and efficient photocatalyst capable of discolouring textile wastewater. GGBFS is a waste material in an iron industry. Methylene blue was used as the probe dye and natural sunlight was used for activation of the photocatalyst. It was observed that under the experimental conditions, ZnGP-40 exhibited twice the discoloration efficiency than conventionally used ZnO or TiO₂. This enhanced performance is majorly attributed to increased surface area of ZnO when strewn in the GGBFS matrix. The photocatalysts were characterized by SEM, TEM, PSA, TGA, BET and UV–Vis/NIR. The effect of photocatalyst loading, speed of agitation and solar insolation has also been studied. Since this study has been performed in direct sunlight, it exhibits a realizable application of solar energy in the treatment of wastewater.     

Electrochemical Characterization of Egyptian Blue Pigment in Wall Paintings Using the Voltammetry of Microparticles Methodology

The solid state voltammetric response of Egypt blue, Han blue and ploss blue pigments upon attachment to graphite electrodes in contact with aqueous phosphate buffer at pH 7.0 is studied by voltammetry of microparticles and scanning electrochemical microscopy. Such voltammetric responses, combined with those for synthetic specimens consisting of binary mixtures of the pigment and SiO₂ or CaCO₃ as well as ternary ones of CaCO₃ and SiO₂ mixtures allow for the identification of the pigment and the support in samples from wall paintings using different electrochemical parameters, in particular upon performing the Tafel and modified Tafel analysis of voltammetric peaks. Identification of Egypt blue in microsamples of murals from a Roman archaeological site in Castulo (Jaén, Spain) is discussed.     

Blue phase III widening in CE6-dispersed surface-functionalised CdSe nanoparticles

The phase transition behaviour of the chiral liquid crystal CE6 doped with spherical surface-functionalised CdSe nanoparticles has been examined by means of high-resolution adiabatic scanning calorimetry and polarising microscopy. The addition of nanoparticles results in an essentially stabilised blue phase III. The phase diagram is displayed upon heating and cooling and the enthalpy changes involved in the conversion between the blue phases are determined. The dispersion of functionalised nanoparticles is prominent for the stabilisation of blue phase III, which is potentially useful for applications, especially if applied on liquid crystals that exhibit blue phases close to room temperature.     

Phenyliodine(III) Diacetate/I2-Mediated Domino Approach for Pyrrolo[1,4]Thiazines and 1,4-Thiazines by a One-Pot Morin Rearrangement of N,S-Acetals

An efficient domino transformation using a phenyliodine(III) diacetate (PIDA)/I₂ combination towards Morin 1,4-thiazine compounds has been developed starting from N,S-acetals. The latter leads to “one-step” regioselective methylene insertion without the need for traditional sulfoxide intermediates in good yields. The reaction involves easily accessible N,S-acetals obtained from cost-effective basic ketones and cysteamine as starting materials. This process ultimately leads to 1,4-thiazines related to natural product and fused derivatives necessary for further QSAR study.     

6,6′-Thiobis(methylene)-β-cyclodextrin dimer as a dimeric host and reusable promoter for synthesis of chromenones in water

Herein, two unit of β-cyclodextrin linked by thiomethylene bridge was synthesized and employed as a novel efficient supramolecular host for the synthesis of biologically active chromenones templates via three-component single-pot reaction. A possible reaction mechanism through molecular complexation is suggested based on 2D ROESY NMR spectroscopic analysis. Moreover, the catalyst could be easily recycled, while a 94% yield and 89% rate of catalyst recovery could be achieved after four cycles of catalyst recycling. Environmentally benign reaction conditions, excellent yields, and avoidance of organic solvent and conventional isolation as well as purification are the noteworthy credits of this developed protocol.     

Effect of spacer length on mesomorphic behaviours of chiral liquid crystal compounds containing (-)-menthyl

ABSTRACT

A homologous series of new chiral liquid crystal compounds, MnBEB (n = 4–10), was prepared by covalently linking a chiral (–)-menthyl with biphenyl-benzoate via a dicarboxylic spacer of varying length and parity. A combination of analysis methods, such as FT-IR, ¹H NMR spectra, differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction was carried out to systematically investigate their phase structures and phase transition behaviours. The length and parity of the flexible spacers has a profound influence on the T_m and T_c and a modest odd-even effect is observed for the chiral liquid crystal compounds MnBEB. Only compound M4BEB developed an N* phase with selectively reflection on heating and a blue phase on cooling process. In addition, increasing the length of the flexible spacers tends to narrow the temperature range of the N* phase and widen the smectic phase, moreover, the pitch becomes longer with the spacer increases.     

Theory of nematic–smectic phase separation in thin twisted liquid crystal cells

Recently it has been shown experimentally by the authors that a highly twisted thin nematic cell at low temperatures can separate into a smectic A region in the middle of the cell surrounded by twisted nematic layers at the boundaries. In this case the twist is expelled into the nematic layers and the nematic–smectic A transition temperature is strongly depressed. We present a thermodynamic theory of such a phase transition in a twisted nematic cell, taking into account that the smectic A slab inside the nematic cell can be stable only if the decrease of free energy in the smectic region overcomes the increase in distortion energy of the twist deformation in the nematic layers plus the energy of the nematic–smectic A interface. In such a system the equilibrium thickness of the smectic A slab corresponds to the minimum of the total free energy of the whole cell, which includes all the bulk and surface contributions. Existing experimental data are at least qualitatively explained by the results of the present theory. This opens a unique possibility to study the properties of the nematic–smectic interface which is perpendicular to the smectic layers.